ID 3797201

Available

Ermenrich Ping MK70 is a clamp meter with DC current measurement function. They also measure alternating current and combine the functions of 6 more measuring instruments: ohmmeter, voltmeter, frequency meter, capacitance meter, duty cycle meter, and thermocouple-based temperature sensor. The high reliability of measurements is guaranteed by a calculation based on the true root mean square value (True RMS). The wide functionality covers the needs of not only the hobby handyman but also the professional electrician.

The digital clamp meter is also used for diagnosing electrical networks for open and short circuits, to test diodes for faults, and detect hidden wiring (NCV function). This model also has advanced functions: inrush current measurement, frequency converter, low impedance mode (low resistance voltage measurement), DC zero setting (DCA Zero).

The device has auxiliary functions that increase comfort and simplify routine operations: holding readings on the screen (Hold), storing limit values (Min/Max), relative measurements through reference values (REL). In addition, the digital clamp meter is equipped with a built-in flashlight and has a convenient display with an easy-to-read indicator and a graphic scale.

The device runs on standard batteries; when the battery is low, a notification appears on the screen. The auto-off function helps the batteries last longer without needing to be replaced.

Key features:

  • Digital clamp meter of the True RMS class with measurement of alternating, direct and inrush current
  • Measurement of DC and AC voltage, resistance, frequency, capacitance, duty cycle, temperature
  • Electrical continuity diagnostics, NCV function for locating outlets and live wires, diode testing for faults, frequency converter, low resistance voltage measurement
  • Convenient functions for working with measurement results: relative measurements using reference values, holding readings on the screen, recording minimums and maximums
  • Flashlight, auto-off function, battery-powered

The kit includes:

  • Clamp meter
  • Probes
  • Pouch
  • User manual and warranty card
BrandErmenrich
Warranty5 лет
EAN5905555017495
Package size (LxWxH)28x13x6 cm
Shipping Weight0.65 kg
Diodes testyes
Non-contact voltage detection (NCV)yes
True RMS yes
Hold functionyes
Limit value function (Min/Max)yes
Continuity testyes
Relative value measurement (REL)yes
DCA Zeroyes
Low impedance (LowZ) voltage measurementyes
Frequency converter (VFD)yes
Inrush current measurement (INRUSH)yes
Selection of the measuring limitauto, manual
Basic functions voltmeter, ammeter, ohmmeter, capacitance meter, frequency meter, duty cycle meter, thermocouple
DC voltage measuring limit600mV/6V/60V/600V/1000V: error ±(0.5%+3)
AC voltage measuring limit600mV/6V/60V/600V/750V: error ±(0.8%+3)
DC current measuring limit60/600/1000A: error ±(2.5%+5)
AC current measuring limit60/600/1000A: error ±(2.5%+5)
Resistance measuring limit600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ: error ±(0.8%+3)
Capacity measuring limit10nF/100nF/1μF/10μF/100μF/1mF/10mF/100mF: error ±(3.0%+3)
Frequency measurement limits10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz: error ±(0.5%+5)
Duty cycle measurement range1–99%: error ±(1.0%+2)
Overvoltage categoryCAT III 1000V, CAT IV 600V
Display counts6000
Display backlightyes
Flash lightyes
Safety standardsEN61010-1,-2-030; EN61010-2-033; EN61326-1
Operating temperature range,°C−40… +1000°C (−40… +1832°F): error ±(1.0%+2)
Power supply3 AAA batteries (not included)
Low battery status indicatoryes
Auto power offyes