Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, so it is extremely resistant to scratches even when in contact with sharp objects and in addition, it is covered with an oleophobic coating that reduces fingerprints.

The UV model is glued with a liquid substance over the entire surface of the screen, and then with the help of a UV lamp the substance is hardened.
This combination results in a perfect effect of smoothness, clarity and responsiveness.
Installation is easy and pleasant for the user

Check out how to install: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be

* We do not recommend using 3D glass without any casing.
** We do not recommend using the glass if the case overlaps the edges of the screen too much, there is a risk of undermining.
*** The functionality of the fingerprint reader in the screen may be slightly affected if a film or glass coating is installed. The fingerprint reader is not fully refined for additional coatings.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and you will not be disturbed by the installation.
2) Clean thoroughly and degrease the surface of the screen, then use a dry cloth to polish it to a shine.
3) Use the ribbon from the kit to seal the speaker.
4) Connect the UV lamp using the Type-C cable to the power source.
5) Pour the liquid on the very center of the device.
6) Install the glass as evenly as you can, this step can also be corrected before the surface cures when the liquid is on the screen along with the glass.
7) If an air bubble has appeared, use an ATM card and gently push it out of the glass, this step is done before curing.
8) Using a UV lamp, cure the glass along the center in five places for 15 seconds each and then around the edges for 10 seconds each.
9) Clean the phone of any residual cured glue.
10) If your device has a fingerprint reader in the screen, be sure to remove and re-add the fingerprint after installing the screen glass.
11) Enjoy a job well done!

PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- Tempered glass with a thickness of 0.3mm
- 9H scratch resistance
- Equipped with oleophobic coating
- Leaves no trace after removal
- Dimensions: 158x72mm

KIT INCLUDES:
2 x Hofi UV Pro+ Glass
1 x UV lamp (without Type-C cable)
2 x Tube with glue
2 x Installation kit